Quote:
Originally Posted by Accelo
If the rod is too long the brakes will not release. My friend smoked his new brakes because of this issue. So if yours is not the correct length it would be too short.
With so many different parts your issue could be some where else? Even with a rod installed that isn't the correct length the fronts are working. And the system bled. I suspect some other issue.
Every thing is new but the rear flexible line. I would confirm it's condition or just replace it before moving one.
Best of luck.
|
I have a new rear flexible line to install, but the rears were working with the 4 wheel drums, and nothing on the rear system was changed at all? Could swapping the front brakes create issues with that hose in the rear?]