With the fender out of the way, the poorly fitting right wing window and door skin opening were addressed. After some inner door modification, Kelly has got the wing window fitting better than ever!
The lower part of the gasket was left out to help train it to close the gap as well. In addition, he cleaned up the front lower adjuster opening (incorrectly placed) that had required modification just to install the adjuster.
Closing up the door skin window opening required breaking loose the upper inner door structure and physically removing the bow. Removing the bow did result in a small dent that’ll be addressed down the road. I'll tell you we came so close to replacing this door and probably would’ve if we'd known for sure that it would’ve been better. The good news is that he stuck with it and is putting these problems to bed.
