Re: No start issue
Quote:
Originally Posted by mongocanfly
I have already checked pin/wire location and continuity from what psi sent me
This is what I got from them
And the are correct going by this
---
Here is the wiring, check all three wires for continuity
BROWN TO BLUE PCM PLUG 73
PINK TO BLUE PCM PLUG 61
RED TO GREEN PCM PLUG 39
PLUG LABELED A,B AND C
-----
But i needed to know which of the 3 is signal wire...
And I agree , I need all the help I can get..haha
|
hope this helps
__________________
71 c-10 Long Bed, under the knife for a No Limit Engineering Wide Ride Chassis Pack and coil over static drop.
07 Silverado Classic 2wd
95 Camaro 427SBC/TH350
|