[SCOTI]

Originally Posted by Beach-Burban

***Update***

Three things to note in picture: The bolt hole to the right of the flange that the "Pro" used; How much clearance there is when the primary tube isn't sitting on the "bump"; and the area with the purple rag...that will be slightly clearanced for the nameplate.


Attachment 2258600

This picture shows how only a slight amount of grinding will be required to fully clear that retangular nameplate: A little by the purple rag and a little where the frame comes to a point.

Now that I've seen the images on my actual computer vs my phone screen, the area between where your purple rag is on the frame & the 'branding plate/tag' is where I slightly buzzed mine as well (3/16 - 1/4 " removed).