|
Re: Anybody using a 6l80 in their swap?
Quote:
Originally Posted by Joyridin
Yes, I believe it is the correct pin. They are labeled on the connector and it is in #7. I am going to run a resistance check back to the switch just to make sure.
Mine isn't showing anything like what you are seeing in HP Tuners. I am going to have to do some more checking when I get a chance. Mine shows neutral in D, D4, D1 and all the rest except park and reverse. It changes when I am driving though.
Thanks!
|
maybe the shift linkage is out of adjustment? I would imagine it would show the same, neutral, for neutral, drive for drive/D6
I forget what version of HPtuners I have, but the config file should work. If you have a custom config file, I would save it before loading another one.
clint
__________________
1987 Silverado - L83 5.3 w/ 6L80e ,A/C,P/W,P/L,TILT, HID projectors, Wilwood C-10 Pro Spindles w/ 2018 silverado front brakes & C-5 Corvette Rear Disc Brakes
1999 BMW 528i - 5.7 LS1 w/ 4l60e, Ford 8.8 IRS w31 spline posi & FX-r projector retrofit
New project: 2006 BMW x5 6cyl AWD to L83 6l80e 4wd to 2WD / RWD
A poor man buy's it twice
finally got my domain name back, 87chevy.com.... site rework in progress
|