|
Re: 65 C10 Family Connection
Whoo! The holes match. We are using the front vented rotor from a late '90's AWD Chevy Astro van as the rear disk. The rotors are 1.25" thick and 11.6" in diameter. For now I will be using GM D52 calipers.
The OD of the axle and the OD of the register hub were turned down to match the rotor, so no mods to the rotors needed, now or in the future. Just a regular parts store item
Oops.. The picture shows the Ford pattern. I guess I forgot the take an after pic..
|