[fauXGT]

Originally Posted by mr48chev

In my poking around I found this https://www.code504.com/complete-bra...rame-swap-kit/

Code 504 and obviously code 504 SSs. Plus it only seems to be a direct bolt on with their kit. Thing is, if they can build it to work you can figure out how to fab up your own. i keep forgetting that standard issue S-10 swaps have several inches of space between the cab floor and the S-10 frame rails pretty much like a body lift on a 4x4.

Is what I have. But the pedal mount point was a 90* w/ threaded pedal post. Would not fit thru the stock fire wall hole.
I did this. Incorporate the stock pedal assembly & fit it to the aftermarket booster.
2 threaded screws with a grade 8 self locker in the center for safety.