The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 47-55.1 1951 GMC Floor High Hump

cff · 04-18-2023, 05:00 PM

First one is with the old front engine cross member cut out to fit the 292. Next two are the front and rear view with the piece I bent up and welded in to that spot. Last is with the 292 in place. Also have a 700r4 connected to it that didn't require me having to cut the firewall or floorboard out.

04-18-2023, 05:00 PM	#39
cff Registered User Join Date: Feb 2014 Location: langley BC Posts: 162	Re: 1951 GMC Floor High Hump First one is with the old front engine cross member cut out to fit the 292. Next two are the front and rear view with the piece I bent up and welded in to that spot. Last is with the 292 in place. Also have a 700r4 connected to it that didn't require me having to cut the firewall or floorboard out.