Quote:
Originally Posted by Chilly178
I was putting together a driver side door for my 67 c10 68 with a 67 vent window with parts laying around and I put everything together and put new precision seals in it as well as rebuilding the vent window and on the bottom right part of the window there is a metal channel that the glass sits in and and the corner of the channel is tearing up the felt going up and down. Window is hard going up and down because its catches on the felt in certain spots and is tearing it. Anyone ever hear of this? I'm letting the weatherstripping glue adhere for a bit longer with the window down but I don't know if something in the door is tweaked or what.
|
I put new division bar felts in as well when I redid both doors about 1 1/2 years ago. The windows on both sides started going up and down with much difficulty. I took the doors apart again and found the division bar felt on both windows had rolled up from the bottom and were snagging the windows. Eventually it pulled both window glass out of the of the tracks they are part of. Real Pita. I replaced the division felt, relubed the tracks and the glass now goes up and down with no problem at all. I have no idea what caused the division bar felt to roll up. They were definitely seated in there prospective tracks.