I’m getting a power steering leak on the high-pressure hose where the AN the adapter fitting screws into the steering box. It only leaks if you turn the steering all the way to the stops. It’s 93 Silverado with an L86/8L90 swap, Holley mid mount accessory drive setup, has the factory steering box with Russel AN o-ring adapter fittings. I’ve tried 3. None have leaked while driving with normal steering, but if you take it to the stop for more than a few seconds, it leaks profusely. I’m not sure what’s going on. I'm going to try to go to NAPA this morning and see if they have any solutions. Any help or suggestions would be appreciated.
PS. I know this is not a squarebody, but the engineering is the same and you guys are more responsive than the OBS page,
