|
Re: Running a little warm ? Air in system ?
http://67-72chevytrucks.com/vboard/s...d.php?t=836499
if you have a block off valve installed its now not OEM, youve blocked off the coolant return flow to the thermostat.
if you remove the valve from the system, then the vintage air system wont be as cold as it should be, if you leave it in there, then its, well back in the same predicimant.
option is to run some cheap aftermarket chineasium valve that will probably fail and look like poo... or run something like this:
https://www.lojkits.com/products/ls-...r-bypass-block
about as clean as it looks.
if your cheap and handy, you can braze up you own if the pex pipe fittings fits your hose
sand down the "T" with a file carefully, solder them up
ad its the same thing, little bulkier, paint it black and its almost hidden...
my bmw x5 swap
__________________
1987 Silverado - L83 5.3 w/ 6L80e ,A/C,P/W,P/L,TILT, HID projectors, Wilwood C-10 Pro Spindles w/ 2018 silverado front brakes & C-5 Corvette Rear Disc Brakes
1999 BMW 528i - 5.7 LS1 w/ 4l60e, Ford 8.8 IRS w31 spline posi & FX-r projector retrofit
New project: 2006 BMW x5 6cyl AWD to L83 6l80e 4wd to 2WD / RWD
A poor man buy's it twice
finally got my domain name back, 87chevy.com.... site rework in progress
|