|
My 70 has open knuckle w/ drums and my 71 has open knuckle w/ discs, you could just swap everything from the knuckle out but usually it's easier to find a complete front axle from a 71-87 truck or -91 for blazer / suburban. It was thought that you could swap spindles and backing plates from a disc 44 to a drum 44 but it clocks the caliper back or forward depending on how you put it on. On a closed knuckle front you will not be able to convert to discs. I had a lot of pics but they are on another computer w/ a virus! So after the storm I could shoot some pics.
__________________
1970 K25, 8' stepside bed 350/465/205 44 up front, 60 in the rear 4.10s rolling on 33" Dunlop MTs
1986 K5, 350/465/208 Dana 60/14 bolt from a cucv 36" Super Swampers TSL/SX
1983 K20 w/ CUCV axles, 350/700R4/208 sitting on 37" Goodyears
1986 M1031 6.2 diesel, TH400/NP205 locker in the rear and a LS in the front, all stock for now.....
1986 K30, 350/400/205 dana 60 and 14 bolt. I kept the drivetrain. Body/bad and chassis are gone.
1981 K30, 350/465/205 dana 60 and dually 14 bolt. Has a G80, and a flat bed. Going to replace the flat bed.
1985 K20, 350/400/208 10 bolt and SF 14 bolt. I wonder where I can find some 1 tons. Hmmmmm 
|