Quote:
Originally Posted by Dead Parrot
Pull and reset the fuses for both radio and headlights. Simple to do and there might be bump sensitive corrosion on the press fit connectors.
|
Yes I only just now learned not to use harbor freight fuses. You need to use the name brands like Littlefuse or Bussmann. So I'll be replacing those first. Trailer plug wiring all looks fine. All the headlight wiring is new because I did the relay mod and went with LED headlights. And for a long time it all worked fine. These flickering problems started after I replaced my starter.
So I'm going to redo the starter wiring because it looks pretty bad. There's some holes in the insulation, and the factory fusible links (those in-line plastic cylinders) look like they're ready to fall off.
So does anyone know why the starter wires are 12 gauge, but the fusible links they connect to are only 14 gauge? I'm kind of an electrical newb but that doesn't seem to make sense. Seems like your fusible links would also need to be 12 gauge. Here's some:
https://www.ebay.com/itm/313506742421