View Single Post
Old 10-01-2023, 09:43 PM   #2
cwcarpenter98
Senior Member


 
cwcarpenter98's Avatar
 
Join Date: Jan 2018
Location: Hickory Flat, GA
Posts: 4,507
Re: Exhaust manifold angle?

As long as you're keeping the engine in the correct, v8 location for 60-66 trucks, you'll want to use the straight down manifolds. The angled ones were used on the 67-72 trucks that had the v8 sitting further forward in the truck than where the 60-66 v8s sit.

What six do you have? If you have a 230 or 250, you don't have to change the frame side of the engine mounts. If you have a 292, you'll need to change the passenger side, but the driver's side is the same.
__________________
Christian Carpenter

1963 C10 - Frankentruck 283, Muncie 3 speed with overdrive
Overdrive wiring here
1963-ish truck bed trailer - Half-Wit

1981 C10 - Penny 305, th350 --> Soon to be 350, Saginaw 4 speed

1995 Dodge Dakota Sport

"I'll put it simple: if you're going hard enough left, you'll find yourself turning right." - Doc Hudson
cwcarpenter98 is offline   Reply With Quote