[pdxhall]

Thanks for the comments. I have done all you recommended. I cleaned the lines with air and no plugging. I decided to remove the filter at the back near the tank. It did not seem to be clogged but I left it out. I also checked all of the lines and filter from pump to carb and they were also clean. I had my wife crank the engine while I checked to see if any gas was getting through the pump. It was pumping gas but very little pressure. It doesn't seem to have enough to get to the carb. It is still dry. So I was pretty sure it was the pump, so I removed it and took it apart. The gasket/seals were not torn but looked stretched out and dry. have bought a new Edelbrock pump and I will be putting it on today. Man, I hope this is it. This is show and cruise time down here in Tucson that I'd like to start taking part in.