Re: 1968 C40 to K40 pickup project BlueMule
I cleaned up the roof as best I could, and fit the roof front panel from the blue cab into place. I tried my new flange tool on the roof panel, to fit it under the rear roof panel and clamped it into place. I used some Cleco fasteners to fasten the 2 panels together. I tacked it into place, but the panels are pulling down at the seam, so I need to figure that out before I finish welding it down.
__________________
Mike
67 Camaro "Amber"
72 K10 Longbed "Old Green"
68 C40 to K40 project BlueMule Build
2006 GMC Sierra "Lello Truck"
|