Re: parking brake cable recomendation
On my 67 with a 9.5 14 bolt I used Camaro rear disc. I used the Camaro cables from Rock auto. Placed/fitted the frame mount then used the cable couplings from Rockauto. If I had to do again I would just leave the drums. But for the intermediate cable I used 1/8 inch stranded cable (TSC), drilled an eighth inch hole in about 1/2 inch length of 5/16 inch solid rod. Squeeze them with a crimp tool then put a hot mig spot on the ends.
Turned my orig emergency brake into a parking brake. To pass Texas inspection I had to depress brake pedal then apply hand brake lever to pass in gear idle.
__________________
1942 Chevy 1/2 ton Rod, 1959 GMC 1/2 ton Fleet Stepside, 1967 Chevy SWB K10, 1985 Corvette Coupe 4+3, 2015 Chevy Duramax reg cab 4WD W/T
Last edited by dennislbrooks; 12-16-2023 at 09:01 AM.
Reason: pic
|