The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - Looking for NOS ignition switch and wire connector

**HO455** · 12-21-2023, 02:09 PM

I can't remember if it was M&H or AAC wiring but, one of them sells connectors separately. I've seen both of their factory style replacement harnesses and they don't use the flexible Chinese ones.

Here is a thread I started on ignition switch failures. Currently I am of the opinion that a cleaned and inspected original or at least a replacement manufactured in the 70's is the best option. If no other option then reforming the contact shape on a new one may help curtail early failures.

I'm still using the Echlind replacement at present. But I should pull it out and do a inspection.

https://67-72chevytrucks.com/vboard/...d.php?t=818861

12-21-2023, 02:09 PM	#2
HO455 Post Whore Join Date: Feb 2016 Location: Portland Oregon Posts: 11,616	Re: Looking for NOS ignition switch and wire connector I can't remember if it was M&H or AAC wiring but, one of them sells connectors separately. I've seen both of their factory style replacement harnesses and they don't use the flexible Chinese ones. Here is a thread I started on ignition switch failures. Currently I am of the opinion that a cleaned and inspected original or at least a replacement manufactured in the 70's is the best option. If no other option then reforming the contact shape on a new one may help curtail early failures. I'm still using the Echlind replacement at present. But I should pull it out and do a inspection. https://67-72chevytrucks.com/vboard/...d.php?t=818861 __________________ Thanks to Bob and Jeanie and everyone else at Superior Performance for all their great help. RIP Bob Parks. 1967 Burban (the WMB),1988 S10 Blazer (the Stink10 II),1969 GTO (the Goat), 1970 Javelin, 1952 F2 Ford OHC six 4X4, 29 Model A, 72 Firebird (the DBP Bird). 85 Alfa Romeo If it breaks I didn't want it in the first place The WMB repair thread http://67-72chevytrucks.com/vboard/s...d.php?t=698377