Quote:
Originally Posted by theastronaut
When you get to the rockers, make sure the inner lip that the door seal fits over isn't sticking too far outward. We've seen a few trucks with aftermarket rockers with that lip too far out and it makes the door really hard to close because the seal gets pinched. You may have to cut it off and weld it farther inward to align with the door correctly.
|
I’ve done the rockers and that part looks fine, but like all the others I’ve ever bought they had to be filleted and reworked at the curves where they meet the kick panel area. That’s good info though and I’ll keep that in mind when I get to the door seals.