The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Dead Parrot · 01-07-2024, 04:49 PM

I have a hazy memory(was at least 6 years ago) of similar re-pin issues when I replaced the turn signal switch in my 75. Original column. Also a local parts store switch. But everything worked when I was finished.

Any chance you swapped a pin during your re-pin?

Is the current installed column original to the truck or a swap by a PO? A swap might also explain the plug/pin miss match. If a swap, the PO might have replaced the truck's original plug with the one from the donor vehicle.

01-07-2024, 04:49 PM	#4
Dead Parrot Registered User Join Date: Aug 2012 Location: Oklahoma City, OK Posts: 2,502	Re: Turn Signal Quandries I have a hazy memory(was at least 6 years ago) of similar re-pin issues when I replaced the turn signal switch in my 75. Original column. Also a local parts store switch. But everything worked when I was finished. Any chance you swapped a pin during your re-pin? Is the current installed column original to the truck or a swap by a PO? A swap might also explain the plug/pin miss match. If a swap, the PO might have replaced the truck's original plug with the one from the donor vehicle.