[leegreen]

little dab of 3m weatherstrip adhesive to join the ends, offset the expansion cord joint from the seal joint and glue it at end too

also for good seal, get a tube on non hardening butyl rubber glass sealant and run a bead in the rubber on both the body and glass side.

For windshield butyl rubber on body side and adhesive on glass side to help lock it in place.


I am not a glass guy, but Precision has some utube videos on installing glass in old trucks, they are worth watching. I made a ball end tool from a junk screwdriver, bent a welding rod into a tool to feed the cord into rear seal and found some good quality hard finish cord to pull the windshield rubber seal with.
got all 3 pieces of glass in with a helper, no leaks