The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**TKCR** · 02-16-2024, 08:31 PM

You sure can. I used to restore the bench seats, and I restored all the tracks.
I had a rectangular plastic flower container. One that was long enough and deep enough for the tracks to be fully submerged in EvapoRust. They would soak overnight. Then I would take them to the sink, and with a toothbrush I would rinse them off. Then immediately blow them completely dry with an air nozzle with the air compressor. Paint with VHT Epoxy. After the pint fully dried, then sprayed gel WD40 on all the bearings, rollers and springs.

02-16-2024, 08:31 PM	#7
TKCR Senior Member Join Date: Oct 2014 Location: Ohio Posts: 7,006	Re: seat track restoration You sure can. I used to restore the bench seats, and I restored all the tracks. I had a rectangular plastic flower container. One that was long enough and deep enough for the tracks to be fully submerged in EvapoRust. They would soak overnight. Then I would take them to the sink, and with a toothbrush I would rinse them off. Then immediately blow them completely dry with an air nozzle with the air compressor. Paint with VHT Epoxy. After the pint fully dried, then sprayed gel WD40 on all the bearings, rollers and springs. Attached Images __________________ FB Page for my Seats Belts https://www.facebook.com/73-87-Chevy...9439407476735/ Restoring Seatbelts: http://67-72chevytrucks.com/vboard/s...d.php?t=809750 SOLD My 86 Build:http://67-72chevytrucks.com/vboard/s...d.php?t=654972 Past Restored Bench Seats:http://67-72chevytrucks.com/vboard/s...d.php?t=715398 PayPal link to pay for your items: https://www.paypal.me/TKCR Last edited by TKCR; 02-16-2024 at 08:53 PM.