[Roostre]

Today I cut the passenger's side rocker out of my cab. What was left of the original outer and inner rockers were still there. A previous owner pop riveted some roofing tin over them and then put bondo over that. The roofing tin was also rusting through, so that fix was pretty old too. I used most of a 3 inch cut off wheel, a drill, tin snips, plasma cutter, hammer, and pry bar to get the rocker and patch off.

Having it all out of the way should make floor replacement easier, along with patching lower A and B pillars.

Pictures are of before, during, and after removal along with some of the lower pillar spots that need attention. Enjoy.