The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

1-PU70 · 08-22-2004, 09:00 PM

I just put a set of Blazer seats in mine today. I used the Blazer track for the drivers side and another driver side track forn the pasenger side. None of the holes lined up so I hade to drill all new holes. No big deal. But the funny thing was for the center console there were 4 dimpals on the floor so I knew wright where to drill. No shimming of the rear needed. Good luck Oh ya the seats and brackets I used were from a 72 Blazer

08-22-2004, 09:00 PM	#3
1-PU70 Registered User Join Date: Apr 2000 Location: Bradenton, FL Posts: 1,036	I just put a set of Blazer seats in mine today. I used the Blazer track for the drivers side and another driver side track forn the pasenger side. None of the holes lined up so I hade to drill all new holes. No big deal. But the funny thing was for the center console there were 4 dimpals on the floor so I knew wright where to drill. No shimming of the rear needed. Good luck Oh ya the seats and brackets I used were from a 72 Blazer __________________ 1970 CST/10 402,700R4,3:73 posi,AC,PS,PB,TLT,PW,Buckets with heaters Last edited by 1-PU70; 08-22-2004 at 09:12 PM.