The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 55.2-59 AC condenser

**Hcb3200** · 05-03-2024, 09:43 AM

it does not have to be centered. unless you are worried about the look etc.

You can put one side ( the inlet outlet side) on the current support brackets with radiator. Then fun a flat stock vertical down where the other side is and attach. Once you get it in there it should be a tight fit with the cross-brace bars. I also attached to one of the cross-brace bars and I also make sure rubbing points had rubber between.

you also don't have to make it vertical you can go side to side and just put inlets on the bottom (or top)

05-03-2024, 09:43 AM	#3
Hcb3200 Senior Member Join Date: Apr 2017 Location: Suwanee GA Posts: 237	Re: AC condenser it does not have to be centered. unless you are worried about the look etc. You can put one side ( the inlet outlet side) on the current support brackets with radiator. Then fun a flat stock vertical down where the other side is and attach. Once you get it in there it should be a tight fit with the cross-brace bars. I also attached to one of the cross-brace bars and I also make sure rubbing points had rubber between. you also don't have to make it vertical you can go side to side and just put inlets on the bottom (or top)