Re: Super Cheyenne aka the "Devil Cowboy"
Saturday morning I decided to get the last of the glaze coat on the filler on the back of the cab. Put a few more skim coats of filler in the interior and the two small screw holes I welded up on the roof next to the cab lights. Moved onto the lower Captain's side door rubber trim that I formed a few days ago. Got it all fitted and welded in without any issues. Then gave the Drinker's side upper rocker the last skim coat of the body 3M body glaze.
Then I worked on getting the inner kick panel lower section cut out prepped and welded in. While I was welding the lower section it started a small smoldering fire in the firewall kick panel area where the vented air comes out. Grabbed a bucket of water and dumped down the top of the cowl on the Captain's side and that put it out and also made a nice mess everywhere. So I decided to finish up the welding while it was still wet on the inside, then pushed the truck into the driveway to give it a good bath with the power washer. Mopped up all the water on the floor and called it a day.
|