Quote:
Originally Posted by 70STOVEBOLT
You can convert to cable. There may be an aftermarket kit available, but it's easy to do the conversion with factory parts. You will need the pedal assy from a 71 or 72, the cable, and the cable bracket that fits on the left rear carb stud/bolt. You will also need an adapter plate for the firewall. I made my own plate. Here is a thread on doing the conversion:
https://www.67-72chevytrucks.com/vbo...d.php?t=669995 |
I might have a pedal assembly off a square body, would that work?
I'm almost wanting to stick with the metal rod, but I'm not sure where to get the correct one.
I'm not opposed to swapping to cable, but not sure it's necessary
I did find a manifold with the oil fill tube for a reasonable price (at least I think it was reasonable)
118 bucks delivered
https://www.ebay.com/itm/17544710744...mis&media=COPY
I found a manual choke 4m quadrajet amongst my junk, so that should work fine.