[Orange Crate]

Originally Posted by pjmoreland

Thanks so much for the measurement. I am working on attaching an NP205 to an NV4500 and I made a custom bracket for the transfer case shift lever based on the mounting position that is on the TH400 adapter that came with this round-pattern transfer case. The shift lever ended up leaning way forward, so now it is apparent to me that the shift lever attachment point was in a different place for 67-72 trucks vs. 85-91 trucks. I will be moving the attachment point back on my bracket to match your measurement. The photo below of the complete setup is even after I moved the attachment point back 5/16". I need to move it back an additional 1/4" or so.

You could add an adjustable rod end link. Here is what I made for twin stickin