The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Tx Firefighter · 09-02-2004, 08:05 PM

Unscrew the speedo cable off the trans. Next, you remove the one bolt that holds the gear housing in and pull the housing. The driven gear just slides into the housing after you revove it.

I attached a picture of my turbo 400 so you can see the housing and bolt that holds it in.

09-02-2004, 08:05 PM	#2
Tx Firefighter Watch out for your cornhole ! Join Date: Jun 2003 Location: Azle, Texas Posts: 14,162	Unscrew the speedo cable off the trans. Next, you remove the one bolt that holds the gear housing in and pull the housing. The driven gear just slides into the housing after you revove it. I attached a picture of my turbo 400 so you can see the housing and bolt that holds it in. Attached Images __________________ I'm on the Instagram- @Gearhead_Kevin