The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

*chevytruckfan* · 09-06-2004, 10:10 PM

Thanks for all your help guys that is what I needed for the links. I don't know what the original rear gear ratio was so that won't work. I guess next chance I get I will pull the tail housing. I know I am going to have to remove the drive shaft, but what do I need to do for the tail shaft. I know there are 4 bolts that bolt to the trans housing. Any thing other than that? Any problems I should lookout for? Is it a problem putting it back together to get all the gears to line up right?

09-06-2004, 10:10 PM	#8
chevytruckfan Account Suspended Join Date: May 2004 Location: Lake Placid, Florida Posts: 930	Thanks for all your help guys that is what I needed for the links. I don't know what the original rear gear ratio was so that won't work. I guess next chance I get I will pull the tail housing. I know I am going to have to remove the drive shaft, but what do I need to do for the tail shaft. I know there are 4 bolts that bolt to the trans housing. Any thing other than that? Any problems I should lookout for? Is it a problem putting it back together to get all the gears to line up right? Last edited by chevytruckfan; 09-06-2004 at 10:17 PM.