|
WElcome again from south Mississippi. Like what has beenmentioned you'll need to have the hub hole enlarged some and depending on the particular wheel you may have to much back spcing to fit the wheel on.
Before you invest too much, even though it is not much, I would measure the wheel's back spacing. I think about 4.5" is the most you can fit on a stock truck without headaches. But not Positiivte on that.
They do make 6 on 6 wheel adapters that will but the same bolt pattern, basicly just a spacer to move the wheel out some which could solve the back space problem, if it becomes one.
|