The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Bill72BB · 09-07-2004, 07:57 PM

The gasket goes between the mirror and the door ,there was no gasket between the bracket and the inside of the door, The screws are slightly oversize so they tighten in the bracket .You might want to place the bracket in a vice and test the screws again B4 enlarging the holes. Here are some pic that might help you in placing the mirrors.Had to add a pic with the new paint

09-07-2004, 07:57 PM	#5
Bill72BB Thats the Hillbilly way Join Date: Jul 2001 Location: Torrance,Ca Posts: 5,979	The gasket goes between the mirror and the door ,there was no gasket between the bracket and the inside of the door, The screws are slightly oversize so they tighten in the bracket .You might want to place the bracket in a vice and test the screws again B4 enlarging the holes. Here are some pic that might help you in placing the mirrors.Had to add a pic with the new paint Attached Images __________________ BILL Torrance Calif 90504 Member DUF Club Member Old Farts Club 72 3/4ton Custom Camper BB402/400 trans Dynomax Cerama-coat headers , Hei distributor ,Edelbrock 1411 air,ps,pb,leafsprings ,98 chevy 60/40 seat,S10 shoulder belts tilt,3.54 Dana 60 rear. 16" Eagle wheels with LT265/75 16 tires,Gaylord Lid,H4 headlights with 100W relay conversion. " If I knew I was going to live this long I would have taken better care of myself " Marriage changes passion...suddenly you're in bed with a relative. A GUY'S PRAYER.... Lord, I pray for a nympho with huge boobs who owns a liquor store and likes to fish and hunt and has a Harley .Amen , Last edited by Bill72BB; 09-07-2004 at 08:05 PM.