The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

68w/sbc406 · 09-15-2004, 07:41 PM

i have a P/S pump off of an 86ish PU with all of the A/C brackets, when putting in my motor i made some brackets that would hold it in place and be somewhat adjustable, well now its time to do it the right way. the question i have is if i unbolt the current bracket will this new bracket bolt up??? pic 1 and 2 are of my pump and pic 3 is of the bracket. thanks for the help (and of course it is the last bracket ont the page)
http://www.srbymichael.com/manufactu...e_sbclwp.shtml

09-15-2004, 07:41 PM	#1
68w/sbc406 Got Light Emitting Diode? Join Date: Apr 2004 Location: Newberg, OR Posts: 2,485	SB power steering brackets i have a P/S pump off of an 86ish PU with all of the A/C brackets, when putting in my motor i made some brackets that would hold it in place and be somewhat adjustable, well now its time to do it the right way. the question i have is if i unbolt the current bracket will this new bracket bolt up??? pic 1 and 2 are of my pump and pic 3 is of the bracket. thanks for the help (and of course it is the last bracket ont the page) http://www.srbymichael.com/manufactu...e_sbclwp.shtml Attached Images __________________ 1968 1/2 ton 2wd lwb 6 lug disc and bags up front. Next c notch and rear bags '02 Chevy Silverado LT ext cab short bed 2WD 5/7 drop on 22's(the family car) 1993 Cherokee work ride/weekend wheeler