The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**swervin ervin** · 09-29-2004, 06:08 PM

After removing the bezel, there are some screws across the bottom of the pad above the glove box and one on the end on the passenger side. Then it's just a matter of raising it up a tad and pulling it out. There are some clips on the bottom of the pad that fit into slots in the dash.

Pretty easy job.

09-29-2004, 06:08 PM	#3
swervin ervin You get what you pay for Join Date: Dec 1999 Location: Cherryville, NC Posts: 4,798	After removing the bezel, there are some screws across the bottom of the pad above the glove box and one on the end on the passenger side. Then it's just a matter of raising it up a tad and pulling it out. There are some clips on the bottom of the pad that fit into slots in the dash. Pretty easy job. __________________ Mike 1985 Chevy C-10