Quote:
|
Originally Posted by c-1072
That is a sweet way to cut down the frame do you use a template or is that all from freehand .
|
I used a piece of 1/8" flat bar clamped to the frame as a guide for the straight lines. I cut the corners free hand. I drew the cuts out on the frame after measuring. For the radiused corners, I used one of those plastic circle guides. I am kind of anal about using square corners in something like this, it's a good place for a crack to form.
I am sure it is total overkill on my part, but like I said, I am anal about this stuff
