The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - WTB: front 1/2 or 3/4 ton axle 3.73 gears

Destructo · 10-16-2004, 01:07 AM

I'm looking to buy a 3/4 ton or 1/2 ton front 10 bolt or D44 axle, if the outers on the axles are gone or need replaced no problem, if its 8 lug I plan on swapping my 1/2 ton stuff onto it, just need a 10 bolt for D44 that has 3.73 gears and is complete, no hubs or brakes is ok.

I have a custom rear bumper made from .120 wall square tubing in the back and tubular protection for the sides, I had to cut some slots in the bottom of the bed to clear the brackets, but it gets you much more clearance and protection over a step bumper. Or I can pay cash for the axle.

I'm looking for something not too far away, I live close to Winston-Salem, NC.

10-16-2004, 01:07 AM	#1
Destructo Registered User Join Date: Sep 2003 Location: Lewisville, NC Posts: 1,836	WTB: front 1/2 or 3/4 ton axle 3.73 gears I'm looking to buy a 3/4 ton or 1/2 ton front 10 bolt or D44 axle, if the outers on the axles are gone or need replaced no problem, if its 8 lug I plan on swapping my 1/2 ton stuff onto it, just need a 10 bolt for D44 that has 3.73 gears and is complete, no hubs or brakes is ok. I have a custom rear bumper made from .120 wall square tubing in the back and tubular protection for the sides, I had to cut some slots in the bottom of the bed to clear the brackets, but it gets you much more clearance and protection over a step bumper. Or I can pay cash for the axle. I'm looking for something not too far away, I live close to Winston-Salem, NC. __________________ 1985 Scottsdale Shortbed 4x4 Stout 350 with some "upgrades"-700r4-33x12.5" Mud Tires, Warn 8274-50 winch. 2005 Chevrolet Colorado Regular Cab 2wd 4-banger, 5 speed, Street Pack with 3.73 axle.