|
Tim, I checked the box my tailgate came in last nite & you are right. My mistake, it is a Goodmark Lettered tailgate. I bought it along with a "Tri-Plus" (I checked the boxes) front bed panel & rad support. I obtained these parts before I met you. My vendor of choice btw. I had a guy with a machine shop make the delrin bushings for the trunions because there was so much play between the tailgate pivot bore & the existing trunion dish pivot which I removed and installed the plastic trunion screwed on the plastic bushings. This worked great but the tailgate needs to be adjusted at the top. A friend said to put a 2x4 in the top corner of the side that closes shut at the top and push on the other side to force it to bend until the gap is gone. MotherTruckers I have checked the squareness with a carpenders sq. I have measured across the bed in a x pattern for squareness also.
__________________
Richard Dobson
|