Re: Fuel Tank Vent
I just finished building my tank and used a check valve / screen / cap from tanks inc.
I mounted mine inside the driver side rear wheel well as high a possible.
I also installed a fuel filter along the way to slow any possible fuel flow and air flow.
There are two holding clamps coming off the rear fender mounting bolts hold all in place.
The top piece is enclosed except for a small opening on the backside where there is a screen to breath and keep crud out.
It's been kept in a well closed building and in 4 months I've only gotten a smell of vented gas one time.
The pic of the vent line in the wheel well is sideways.
|