The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - GRIZZ’s English 2001 S10 Extra Cab 4.3 V6 Truck

Grizz1963 · 11-17-2022, 02:43 PM

So reassembly.

In the pinion gear, the carrier needs one of these little spring loaded pins inserted, after some struggling I ground it down very slightly and a hammer completed the job.

Result.

Cover had me stumped, until I looked at a photo taken earlier.

The mesh spins on the inside, it looks so wrong.

.

And of course the scrap.

Good enough reason to struggle or fail to start.

So I thought I would chance it straight away.

See if it would start.

Video:

https://youtu.be/p8B2iFqRTV4

More tomorrow I guess.

.

11-17-2022, 02:43 PM	#1168
Grizz1963 Registered User Join Date: Dec 2012 Location: Rochester, KENT Posts: 10,484	Re: GRIZZ’s English 2001 S10 Extra Cab 4.3 V6 Truck So reassembly. In the pinion gear, the carrier needs one of these little spring loaded pins inserted, after some struggling I ground it down very slightly and a hammer completed the job. Result. Cover had me stumped, until I looked at a photo taken earlier. The mesh spins on the inside, it looks so wrong. . And of course the scrap. Good enough reason to struggle or fail to start. So I thought I would chance it straight away. See if it would start. Video: https://youtu.be/p8B2iFqRTV4 More tomorrow I guess. . __________________ MY BUILD LINK: http://67-72chevytrucks.com/vboard/s...585901]Redneck Express - 1966 C10 Short Fleetside MY USA ROADTRIPS http://forum.retro-rides.org/thread/...2018-humdinger IF YOU CAN'T FIX IT WITH A HAMMER, YOU'VE GOT AN ELECTRICAL PROBLEM MATE.