The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post - 1966 Snub-nose C60 project

lmdangerous · 01-09-2014, 05:08 PM

Ever thought about cutting the axle? I have cut three.If the welder knows what they are doing the axle will brake somewhere else before the weld does. Cut in the center and remove 4 inches from each side. Spring pads are easy enough to duplicate. Just a thought.AND for the record if I have not told you this is one cool build. Any chance that you have another snub nose front cap around. I have a nast idea in my head.
LMD

01-09-2014, 05:08 PM	#90
lmdangerous Registered User Join Date: Nov 2010 Location: Houston, MS Posts: 184	Re: 1966 Snub-nose C60 project Ever thought about cutting the axle? I have cut three.If the welder knows what they are doing the axle will brake somewhere else before the weld does. Cut in the center and remove 4 inches from each side. Spring pads are easy enough to duplicate. Just a thought.AND for the record if I have not told you this is one cool build. Any chance that you have another snub nose front cap around. I have a nast idea in my head. LMD