View Single Post
Old 04-18-2024, 02:28 PM   #165
Chaparralman1974
Registered User
 
Chaparralman1974's Avatar
 
Join Date: Dec 2022
Location: Peoria, Arizona
Posts: 324
Re: My 1967 Chevy K20 Build Thread

Quote:
Originally Posted by Jason Banks View Post
Clay, could you get me pictures and possibly measurements of the parking brake parts I have circled in these pictures? They are missing on my truck.

I ordered all new cables from Inline Tube and the front an rear cables fit fine. - https://www.inlinetube.com/products/sbst6713

The intermediate cable they sent is shorter than the NOS cable(which appears to be the correct part number), but I haven't tried either one yet since I don't have any of the pieces pictured.

Hi Jason, the cab is on the truck now, so I crawled under and tried to get a measurement of the parts you circled. The long rod on the passenger side appears to be about 15 3/4" and the shorter one on the driver side is about 3". It was kinda hard to get my head up in there and hold the camera steady.

Here is a link with a bunch of pictures that I took during the tear down along with a few videos that documented how all the cables were situated in the frame.

https://share.icloud.com/photos/021d...hc2mWcfmRC6chQ

Let me know if you need any additional pictures or anything.


Clay
__________________
Clayton Sikes
Peoria, Arizona
1967 Chevy K20
Build Thread: https://67-72chevytrucks.com/vboard/...d.php?t=841272
Chaparralman1974 is offline   Reply With Quote