[landarts]

Sunday was getting after the Captian's side upper rocker area, addressing the welds, and all of the area to be prepped for filler. I don't think I have ever seen a rocker with such deep spot welds toward the front and just rough metalwork. Anyway, I addressed the issues with a little hammer work and some grinding. Then after it was all cleaned up I applied a coat of filler, sanded then a few swipes of glaze.

Moved up to the upper windshield frame where I filled the large hole from a previous spotlight installation. Got that all sanded down and looking good for primer. Wrapped up by working the inner upper door trim frame with some filler after grinding down all the welding to fix the holes also from spotlight install. Finished up with a coat of body glaze where I had a few deep scratches and a few pin holes.