The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Old_Green · 12-01-2023, 07:48 PM

I cleaned up the roof as best I could, and fit the roof front panel from the blue cab into place. I tried my new flange tool on the roof panel, to fit it under the rear roof panel and clamped it into place. I used some Cleco fasteners to fasten the 2 panels together. I tacked it into place, but the panels are pulling down at the seam, so I need to figure that out before I finish welding it down.

12-01-2023, 07:48 PM	#29
Old_Green Registered User Join Date: Dec 2021 Location: Nampa, Idaho Posts: 47	Re: 1968 C40 to K40 pickup project BlueMule I cleaned up the roof as best I could, and fit the roof front panel from the blue cab into place. I tried my new flange tool on the roof panel, to fit it under the rear roof panel and clamped it into place. I used some Cleco fasteners to fasten the 2 panels together. I tacked it into place, but the panels are pulling down at the seam, so I need to figure that out before I finish welding it down. Attached Images __________________ Mike 67 Camaro "Amber" 72 K10 Longbed "Old Green" 68 C40 to K40 project BlueMule Build 2006 GMC Sierra "Lello Truck"