[dadsburb]

Well got back to working the Suburban this week. Picked up some parts from Richard the end of January on the way to Florida, got home and I'm back at it. Took out the remaining plywood, even shortened, it requires a bit of twisting and turning. Made up a fixture to hold the back of the frame rails for when I do the cut off. Started to clean up the replacement frame rails, and cut off a piece to practice welding, my 90 amp mig may not be up to this repair, I could not get it to over head weld. I will work on my technique and see if It's me and not the machine. First picture is the left rear inner quarter panel behind the wheel, I am just amazed at how good it is and the frame rail is gone.