[65Custom]

The spot welds are generally about 2" apart and you can actually use your fingers to measure the spacing between the spot welds once you get the hang of it it can help you find a spot weld that may not be very visible.

1 pic shows the approximate spacing of the spot welds I have found this to be pretty consist on every thing that I have cut off including the parts trucks that sacrificed their lives for this project.

2 this pic is a shot of the section of the roof above the B pillar. This is right at the section where the Door jamb is there are several pieces welded together here and the roof panel has about 5 or 6 spot welds in this section. When i removed the replacement panel this was the section that provided the most frustration just making that I got them all off and didn't screw up the panel. We will see how this goes when I get there my cab