The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

**doug_p** · 06-24-2022, 10:54 PM

Well, I pulled every wire out of the connectors and re-ran everything on my engine and hid everything exactly how I wanted it. There are two different type of o2 sensors and either I a) bought the wrong sensors, or b) wired them wrong and actually I think I did both. To make it worse, I thought I would be "smart" and make the o2 sensor connection joint with Duetsch connectors which worked great, except when you want to replace one lol . . . shoulda just left the factory connectors on them, DUH. Anyway, just something I need to work out. It ran pretty good, just not as good as I know it could have.

06-24-2022, 10:54 PM	#14
doug_p Junior Member Join Date: Sep 2014 Location: Yorktown, VA Posts: 88	Re: NOT so EZ wiring Well, I pulled every wire out of the connectors and re-ran everything on my engine and hid everything exactly how I wanted it. There are two different type of o2 sensors and either I a) bought the wrong sensors, or b) wired them wrong and actually I think I did both. To make it worse, I thought I would be "smart" and make the o2 sensor connection joint with Duetsch connectors which worked great, except when you want to replace one lol . . . shoulda just left the factory connectors on them, DUH. Anyway, just something I need to work out. It ran pretty good, just not as good as I know it could have.