Ok, at this point I have removed the transmission, the clutch plate, and the flywheel. All the other accessories have been removed (alternator, water pump, intake and exhaust manifolds, magneto, etc).
I have a typical engine hoist that a buddy gave me and I have the Harbor Freight leveler that has four short chains hanging from it. There are clearly great 3/8" threaded bolt holes from the manifolds to connect to on the drivers side, but on the passenger side, the only good bolts holes are near the front of the block for the unused side motor mount holes, no good bolt hole appears to exist on the rear passenger side. Any thoughts on where to attach will be appreciate.
