The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

Orange Crate · 11-28-2023, 11:04 PM

Ok got the new 1350 shafts. We'll see if they fit, Ive got a 3" exhaust going over the transfer case. I don't think I'll have any problem with clearance to the five speed. Without any rework the CV flex is about 28 degrees. A little time with a die grinder on the sharp edges should get that to 30. Picture time....enjoy.

11-28-2023, 11:04 PM	#27
Orange Crate Registered User Join Date: Feb 2011 Location: Under the Truck Dreaming Posts: 642	Re: 1350 Drive Shaft Ok got the new 1350 shafts. We'll see if they fit, Ive got a 3" exhaust going over the transfer case. I don't think I'll have any problem with clearance to the five speed. Without any rework the CV flex is about 28 degrees. A little time with a die grinder on the sharp edges should get that to 30. Picture time....enjoy. Attached Images __________________ 72 K20 Custom Camper, D60, 14BFF, full roller 406 TPI w custom built ECU and yes..it has tow hooks...