The 1947 - Present Chevrolet & GMC Truck Message Board Network - View Single Post

washington blue · 04-01-2018, 05:57 PM

Ogre, I peeked under the cab and the cab gap is about 3/16 from the frame to the channel under the cab where you put the red arrow in post 81. I am hoping it doesen't move when I remove the 1 inch tubing. Also guys, I am wondering about my steering box bolts, I notice the 2 on the bottom are quite rusty. Can I use any grade 8 bolts or must I look for special GM bolts? I also don't know if they are metric threads, the head is 5/8, thanks, Norm.

04-01-2018, 05:57 PM	#95
washington blue Registered User Join Date: Mar 2016 Location: Not far from Sioux Falls South Dakota Posts: 328	Re: norms 55 chevy pu build Ogre, I peeked under the cab and the cab gap is about 3/16 from the frame to the channel under the cab where you put the red arrow in post 81. I am hoping it doesen't move when I remove the 1 inch tubing. Also guys, I am wondering about my steering box bolts, I notice the 2 on the bottom are quite rusty. Can I use any grade 8 bolts or must I look for special GM bolts? I also don't know if they are metric threads, the head is 5/8, thanks, Norm. Attached Images