|
Re: Glue for Woodgrain Trim on Dash Bezel
I would use 3M thin double side emblem tape cut section put on the flattest parts of the bezel. (I make sure that both side of the parts are very clean. then peel the Plastic side woodgrain line up press into place, do on a warm day. Let sit 1day cool down over 1night should last long time.
__________________
 1977 REG cab Long Bed with a 1984 Front Clip, 82 305 .60 over 9.0.1 flat top pistons, 4bbl, TH350, w/84 SS-intake & cam , w/ 1977 big block rad, 1975 gear box, 1984 master w/ metric fittings top & SAE fitting @ portion block, 1975 3.42 gear open diff. Duel 77-87 Factory air cleaner, duel inlet from rad support . Down sized 9' to new 8' Steel flat bed
Was a 77 454 w/308 gear. Taken out 550 lbs. up front with motor clip change.
|